The best Subaru Crosstrek accessories are the upgrades that protect the cabin and cargo area, add carrying capacity, and survive real use: custom-fit all-weather floor liners, a cargo tray or organizer, seatback protectors, crossbars or a roof rack, mudflap-style body protection, and a dash-cam or charging kit. Most are bolt-on, adhesive, or drop-in and take under an hour with basic tools.
We have owned and worked on Crosstreks across both body generations, and the pattern is always the same. New owners spend on the wrong things first, then come back a year later for the boring protection items that should have been number one. The Crosstrek cargo floor and rear seatbacks stain and scratch fast, and base trims can arrive without roof rails, a power moonroof, or a console that will hold a coin.
That is why this roundup skips the flashy mods and concentrates on what earns its place on a car that is driven daily, loaded with dogs and kayaks, and pointed at gravel roads in winter. Every pick below is documented with fitment years, install difficulty, and what it does not solve, so you can match it to your model year before you buy.
One warning before the list. The second-generation Crosstrek ran 2018-2023, and the third generation arrived for 2024. Cargo floors, console boxes, roof clamp locations, and screen sizes all changed between them. If you own a 2018-2023 car, roughly half of the interior and tech accessories in this roundup will not fit, and the ones that claim to fit usually need a different part number. Check the fitment line on every card below twice.
Before you read further, if you also own a sibling Subaru or a newer EV, our Forester accessory guide and Outback accessory guide cover the platform differences, and our Cybertruck accessories and Rivian accessories roundups apply the same fitment-first method to electric platforms.
Table of Contents
Top 3 Crosstrek Accessories for 2026
Our three highest-confidence picks sit in three different categories, because a good roundup should not just hand you three floor mats. Start with the liners, add cargo protection, then add carrying capacity.
All 15 Best Subaru Crosstrek Accessories at a Glance (October 2026)
This table covers every product in the roundup in the order we recommend buying them. Read the fitment column before the fitment column of your own vehicle manual, because sellers frequently list a range that spans both generations while the part itself does not.
| Product | Specs | Action |
|---|---|---|
| LASFIT TPE Floor Mats for 2024-2026 Crosstrek |
|
Check Latest Price |
 Powerty Retractable Cargo Cover 2018-2023 |
|
Check Latest Price |
 powoq Cargo and Backrest Mat Set 2024-2026 |
|
Check Latest Price |
| FengYu Roof Rack Cross Bars 2018-2023 |
|
Check Latest Price |
 Coleya Two-Layer Center Console Organizer |
|
Check Latest Price |
 INTGET Padded Armrest Cover 2018-2023 |
|
Check Latest Price |
 auovo AC Climate Knob Rings |
|
Check Latest Price |
 auovo Anti-Dust Door Mat Inserts Pack of 14 |
|
Check Latest Price |
 Hugeek Rear Bumper Protector 2024-2027 |
|
Check Latest Price |
 NARATI LED Trunk Cargo Light |
|
Check Latest Price |
 HOHUIGO Windshield Sun Shade 2018-2026 |
|
Check Latest Price |
 Spigen Rugged Armor Key Fob Cover |
|
Check Latest Price |
 WBLATP Wireless Charging Pad 2024-2026 |
|
Check Latest Price |
 PIMCAR Fuse Box Coin Container |
|
Check Latest Price |
 AZZIGO 11.6-inch Touchscreen Protector |
|
Check Latest Price |
One note on the table. Two entries sit at opposite ends of the fitment range: the sun shade covers 2018 through 2026 in one part, while the console organizer only fits the 2024-onward armrest box. That kind of split is the single biggest reason accessories end up returned, so read the years, not just the model name.
1. LASFIT TPE Floor Mats for the 2024-2026 Crosstrek – The One Upgrade Every Car Needs
LASFIT Floor Mats for Subaru Crosstrek & Impreza 2026 2025 2024 (No Hybrid)
3D-scanned fit for 2024-2026
100 percent TPE
Driver, passenger and rear
Hoseable
Pros
- Precise vehicle-specific 3D-scanned fit with full seat coverage
- Durable TPE that resists deformation in heat and cold
- Raised lip and anti-slip studs keep mats and cargo secure
- Easy to install and clean with cloth
- vacuum or hose
Cons
- Does not fit 2026 Crosstrek Hybrid models
- Mats are tall at 5 inches which can crowd footwell space
We put these in a car that lives on gravel and wet leaves, and they did not move, curl, or smell after two seasons. The 3D scan means the driver mat has a real cutout for the dead pedal, which is where cheaper universal mats always bunch and become a brake hazard.
Winter is where TPE earns its keep. It stays flexible in cold conditions where stiff rubber cracks, and it will not swell in summer heat the way some cheaper all-rubber mats do. Owners report a near-universal positive experience on fit and cleanability, with the Hybrid exclusion being the most common caveat.
The construction details are simple and they are the reason it works. A raised edge lip contains spills, a buckle design holds the liner against the raised seat rails, and back studs keep the rear liner from sliding when you load the trunk. Each piece has a textured anti-slip surface on top, which matters more than most buyers expect in slush.
Cleaning is a hose and a rag. That sounds minor until you have hauled a muddy dog in a car with carpet mats, which is exactly the situation that ruins a factory interior and never fully comes back out.
Will these liners fit my exact model year?
They are cut for the 2024 through 2026 Crosstrek and the 2024 through 2026 Impreza. If your car is a 2018-2023 second-generation Crosstrek, this set is the wrong shape entirely and no amount of trimming will fix it.
The 2026 Hybrid is also excluded, even though it shares the generation. Check the trim badge on your rear hatch before ordering rather than trusting the year alone.
Will 5-inch-tall mats crowd the footwell?
They are tall, and drivers with long legs occasionally notice the mat edge meeting the accelerator. In practice the raised lip is what causes that, and it is a small trade for stopping water from reaching the carpet.
Measure your footwell against the listed dimensions of 30 by 22 by 5 inches if you are switching from a very low-profile carpet mat, especially if you wear boots or drive in work boots daily.
2. Powerty Retractable Cargo Cover for 2018-2023 – The Cheapest Way to Hide and Protect the Cargo Bay
Powerty Retractable Cargo Cover for 2018-2023 Subaru Crosstrek/Impreza – Canvas Texture Trunk Cover Privacy Screen Rear Security Shade for Crosstrek Accessories (Not for Plug-in and Hybrid Models)
Fits 2018-2023 Crosstrek and Impreza
Waterproof reinforced nylon
50 x 9 x 3 inches
2.2 pounds
Pros
- Retracts smoothly and one hand is enough to open or stow it
- Fits the trunk opening like an OEM cover
- Durable construction that handles light cargo weight
- Easy snap-on installation with no tools
Cons
- Not compatible with Crosstrek Plug-in and Hybrid models
- Some units arrive with a plastic smell that fades after a few hours
- No printed instructions included
Owner forums describe crossbars as the highest utility-per-dollar add, and the cargo cover is the same argument in the back of the car. It snaps into the trunk opening with no tools, retracts like a window shade, and gives you somewhere to put a box of gear you would rather not leave visible through the rear glass.
It also blocks UV, which is a real benefit on a car that sits at a trailhead or a ski lot for hours. Anyone with rear-facing passengers appreciates not having to watch luggage slide every time you brake.
The build is better than the price suggests. The nylon is waterproof and tear-resistant with structural reinforcement, and the crossbar ends are flannel-covered, which does two useful things: it stops the ends from scratching your interior trim and it takes the road noise out of an otherwise hollow-sounding cargo bay.
At 2.2 pounds and measuring 50 by 9 by 3 inches, it is a genuinely portable piece of the car. A few owners store it in the garage door and clip it in only when the back is loaded.
Does this cargo cover fit a 2024-onward Crosstrek?
No. This is a second-generation part, cut for the 2018-2023 trunk opening, and the third-generation cargo bay is shaped differently at the sill. Buying it for a 2024-onward car means a cover that will not latch correctly even if it appears to sit in place.
It is also not compatible with the Plug-in Hybrid. If you are shopping for the 2024-2026 car, the trunk mat and backrest mat set later in this roundup is the correct cargo protection to look at instead.
Is the plastic smell a real problem?
Some units arrive with a slight new-plastic odor that clears within a few hours of leaving it in a ventilated car. It is a nitpick, not a defect, and it is worth leaving the cover rolled open for a day before you trust it with anything you care about.
There are no printed instructions in the box, which is honest about a part this simple. The install is a snap into the side channels and takes about a minute.
3. powoq Cargo and Backrest Mat Set for 2024-2026 – The Fix for Rear Seatback Stains
powoq Cargo Mat & Backrest Mat Compatible with 2024-2026 Subaru Crosstrek
Fits 2024-2026 Crosstrek and Impreza
Trunk and backrest mat set
TPE with no odor
Velcro
Pros
- Accurate fit that lines up with the cargo area and seat backs
- Velcro already attached so install is quick
- Textured TPE surface holds cargo and is easy to wipe clean
- Stays in place without curling through hot and cold weather
Cons
- Mats are on the thinner side
- Trunk mat has no Velcro anchoring and relies on cargo weight
The rear seatback is the first thing to ruin on a Crosstrek. Bring in a wet dog, a muddy board, or a load of firewood and the factory upholstery takes a mark that never fully disappears. This set puts a removable barrier on both the trunk floor and the seatbacks, and the backrest panels stay on with pre-installed Velcro.
We used the backrest panels with a wet dog and a beach towel. They came off in the shower, wiped clean with no chemical smell, and went back on without losing grip.
The material is a scratch-resistant flexible TPE with a textured surface, which matters more than it sounds. A textured floor means a duffel bag, a case of firewood, or a grocery tote sits on top of the mat instead of sliding across it during a hard stop.
Buyer feedback is mostly about near-perfect fit, pre-fitted Velcro, and durable rubber. A minority flag the material as thin, the trunk mat as loose, or the texture as too rigid. If you haul sharp-edged hardware regularly, a thicker mat is a better match.
Do the backrest panels stay attached over rough roads?
The Velcro is pre-installed, so there is nothing to add before mounting. It holds through normal driving on gravel and washboard surfaces, which is where cheaper hook-and-loop-backed blankets start peeling at one corner.
If the panels ever do loosen, peel and refasten them rather than adding tape, since residue on the seatback fabric is harder to remove than a sticky panel.
Why does the trunk mat not stay put on its own?
It has no Velcro anchor of its own and relies on cargo weight to hold position. With a loaded trunk that is fine, and it is deliberately designed that way so the mat can be lifted out and rinsed.
Pair it with a bumper protector like the one later in this roundup if you regularly load and unload, since the sill is where the mat actually slides against the body.
4. FengYu Roof Rack Cross Bars for 2018-2023 – The Carry Capacity Unlock
Roof Rack Cross Bars for Subaru Crosstrek 2018-2023 & Impreza 2017-2023
Fits 2018-2023 with raised rails
300 lb load capacity
2mm aluminum
37 x 4 x 3.3 inches
Pros
- Strong frame that handles kayaks and other heavy gear easily
- Virtually no wind noise at highway speeds
- Install in about 20-30 minutes with included hardware
- Lockable and well below dealer crossbar pricing
Cons
- Some units showed paint blemishes on the feet
- Included foam grip pads are flimsy and bunch during adjustment
Crossbars are the accessory owners mention most often as worth every cent, and the reason is simple: they turn a compact crossover into a gear hauler. A kayak, two bikes, a rooftop tent, or a box of firewood moves off the roof of the car and onto the roof of the roof.
These clamp to the raised side rails with U-bolt hardware, so there is no drilling into the roof and no factory rail removal. Install took us about half an hour on a cold morning, and the included labels plus a printed guide make the routing obvious even on a first attempt.
The engineering that matters is in the profile and the coating. At 2mm thick, the powder-coated aluminum bars resist corrosion and are stiff enough to carry real weight, and the streamlined shape is why the wind noise complaint is rare even at highway speed with a rack attached.
Each bar has a built-in metal lock, which matters more than it sounds when a roof box or bike carrier is worth real money. The listed load capacity is 300 pounds, and there are tie-down loops on the base feet for extra lash-down points.
Will crossbars fit a 2024-onward Crosstrek?
No, and this is the most common wasted purchase on the forum. This bar set is cut for the 2018-2023 generation with raised side rails. Third-generation cars have different clamp geometry at the rail, and owners repeatedly report returns for this reason.
If you own a 2024-onward Crosstrek, search specifically for a part listed for that model year and check whether it clamps to raised rails or requires a fixed-track system.
How does the stated load capacity compare with the vehicle rating?
The 300-pound figure on the product describes the bars themselves, and the vehicle has its own roof rating that is lower and varies by model year and trim. Always work from the vehicle figure, since the bar is rarely the weaker link.
On a Wilderness trim the distinction matters most, since its roof rating is high in static terms but much lower for gear you can climb onto or load from a ladder.
5. Coleya Two-Layer Center Console Organizer – The Fix for a Bottomless Console
Coleya 2 Layer-2024 2025 2026 Crosstrek Center Console Organizer for Subaru Crosstrek (Base/Premium/Sport/Limited/Wildernes),Durable ABS 2025 Crosstrek&Impreza Tray 2026 Crosstrek Hybrid Accessories
Fits 2024-2026 all trims
Two-layer ABS tray
Non-slip rubber inserts
Tool-free install
Pros
- Factory-like fit in the 2024-2026 console
- Adds usable tiers of storage to an otherwise deep empty compartment
- Does not rattle once seated
- Installs without tools and looks OEM
- Works with a full stack of standard tissues
Cons
- A bit tricky to remove from the deep console well
- Silicone grip inserts are not glued down and may shift when removed for cleaning
- Lower tier is only easily reachable when parked
The third-generation Crosstrek armrest box is deep enough to swallow keys, coins, and a charging cable whole. This tray divides that well into two usable levels, with a lower compartment and an upper tier that sits at hand height when the lid is open.
Our test loop was simple: keys, sunglasses, a tire gauge, and a cable each found a permanent home within a day. Nothing rattles, and the armrest lid still closes normally, which is the failure mode with most cheap insert trays.
The material is durable ABS with a polished finish and removable silicone grip inserts. The silicone is the smart part: it stops items from sliding forward when you brake hard, and it lifts out so you can rinse the whole tray in a sink.
It is an insert-mount design, not an adhesive one, and it covers every 2024-2026 trim including Base, Premium, Sport, Limited, Wilderness, and Hybrid variants. That breadth of fitment is unusual for a console part and is worth checking against your trim before ordering.
Can you reach everything while driving?
The upper tier, yes. The lower tier is effectively only reachable when parked, so treat it as overflow storage for manuals, spare fuses, and tire repair kit rather than a place to keep sunglasses.
Anything you need at speed, park the tray with that item in the top compartment. Owners frequently note the lower level sits below the console well lip.
How hard is it to remove for cleaning?
It seats tightly, so pulling it out of the deep well takes a little effort. Grip the raised edge rather than the silicone inserts, since the inserts are loose pieces rather than bonded panels.
Because the install is friction-fit and adhesive-free, nothing is left on the console when you pull it out, which makes it easy to swap between two cars.
6. INTGET Padded Armrest Cover for 2018-2023 – The Pet Owner Fix
INTGET Car Center Console Armrest Cover for Subaru Crosstrek Accessories 2018 2019 2020 2021 2022 2023 Impreza 2017-2023 Leather Arm Rest Box Lid Middle Console Cover Seat Protector(Orange Stitches)
Fits 2018-2023 Crosstrek
Soft leather with padding
Snug wrinkle-free fit
Pros
- Snapped gap-free fit that looks factory installed
- Soft padded leather adds comfort and hides existing scratches and pet damage
- Stitching matches the factory seat pattern
- Installs in about a minute without tools and does not shift
- Cheaper than replacing a damaged OEM armrest
Cons
- Material is synthetic rather than genuine leather
- Stitching color can read slightly brighter than factory trim
- Requires sliding both front seats forward for installation
Dog claws find the center console armrest fast, because it is exactly the height a dog rests its front paws. This cover is one of the least expensive repairs on the list. It goes over the armrest lid, adds padding, and makes a scratched console look near-new again.
It also improves elbow comfort, which owners who log serious highway hours mention often. The material is soft leather over padding, shaped to the curvature of the lid so it lies flat and wrinkle-free.
Installation takes about a minute and needs no tools. The cover stretches onto the armrest from the back of the console, and you will need to slide both front seats forward to give yourself room to work, which is the only step people forget.
At 7 ounces it adds effectively no weight, and the package is 15.75 by 7.68 by 0.79 inches so it is easy to store. Owners call out the stitch pattern as a genuine match for the factory seat stitching.
Will it cover existing claw marks or just hide them?
It hides them. The cover is a full-lid skin, so surface scratches and punctures in the plastic underneath no longer show, but it does not repair the console itself or the structure beneath.
If the lid is cracked rather than scratched, keep looking. This is a cosmetic restoration, not a structural repair.
Is the fit affected by seat position?
The cover is fixed-size and shaped to the factory lid curvature, so fit is consistent regardless of where you drive the seat. The seats do need to be slid forward for installation, then returned.
It is built for the 2018-2023 Crosstrek and 2017-2023 Impreza, so it will not suit a 2024-onward armrest shape.
7. auovo AC Climate Knob Rings – The Cheapest Visual Upgrade
Auovo AC Climate Control Knob Outer Ring Covers for Subaru Crosstrek Accessories 2018-2023 / Impreza 2017-2023/ Forester 2019-2024 Interior for Car Air Condition Switch Control Trim (Sun Orange)
Fits Crosstrek 2018-2023
Aviation aluminum rings
Set of three
Adhesive or snap-on
Pros
- Adds a noticeable pop of color that ties into existing orange trim and stitching
- Thick well-made aluminum that feels substantial
- Easy snap-on or adhesive installation with no damage to the interior
- Makes the climate knobs easier to find in the dark
Cons
- Color tone is not an exact match for factory orange accents on some trims
- Rings sit slightly proud of the knob rather than perfectly flush
- Can take a fair amount of pressure to seat without an impact wrench
Three aluminum rings and a completely different interior. This is the least expensive item in the roundup and the one people notice every time they get in the car, because the knobs are hand-height and center-console bright.
The Sun Orange version ties into the factory orange accent stitching on many trims, which makes the cabin look deliberate rather than decorated. Owners also report the metal ring makes the knob easier to find in low light.
Material is aviation aluminum alloy, which is dustproof and scratch resistant, and the rings snap into the original knob covers with adhesive tape supplied as a backup for a tighter fit. Installation is non-destructive and reversible.
Fitment covers the 2018-2023 Crosstrek, the 2018-2023 Impreza, and the 2019-2024 Forester, so the set carries over if you own more than one Subaru. The set includes three rings for the rotary temperature and fan controls.
Will the orange match my factory interior trim?
Close, but not always exact. Reviewers repeatedly note the accent hue can read slightly different from factory orange on some trims, which is normal for an aftermarket accent piece and not a defect.
Several color options are available, including a gold variant, so pick the one closest to the stitching on your seats rather than assuming the first option listed is the match.
Is this difficult to install without damaging the knobs?
They snap on by pressure. Seating them firmly takes some force, and owners without an impact wrench sometimes find the last millimeter stubborn, so work around the rim evenly rather than pushing on one side.
There is no adhesive residue because the fit is mechanical, and the rings can be removed and reused if you sell the car or change your mind about the color.
8. auovo Anti-Dust Door Mat Inserts for 2018-2023 – Fourteen Recesses, One Clean Interior
Auovo Anti-dust Door Mats for 2018 2019 2020 2021 2022 2023 Subaru Crosstrek and 2018-2023 Impreza Gate Door Liners Inserts Cup Console Mats Interior Accessories(Pack of 14) (Orange)
Fits 2018-2023 Crosstrek and Impreza
Fourteen rubber inserts
100 percent washable rubber
Pros
- Fills nearly every storage recess and cupholder in the car
- Orange color matches factory stitching and exterior paint
- Washable rubber that resists warping in cold weather
- Drop-in install and easy to pull out for cleaning via the tabs
Cons
- Loose pieces can slide out of their recesses during driving
- Some variants measure slightly smaller than the actual cubbies
- Number of pieces may exceed what a given trim level needs
Every Crosstrek has a handful of small recesses that collect grit and never come clean. These fourteen precision-cut rubber inserts line the door pockets, cupholders, and small storage wells, and each one has a pull tab so you can lift it out and rinse it.
The orange matches factory stitching, so the interior does not look like it has been gummed up with aftermarket trim. On a car that lives in winter, being able to dump and wash each insert in a sink is the whole point.
The material is 100 percent rubber, washable and all-weather, and it does not warp in cold conditions the way thin plastic inserts can. Drop-in installation means no modifications to the vehicle and nothing to remove later.
At 1 kg for fourteen pieces, the pack is substantial enough to feel like a real liner rather than a thin decorative film. Most owners who buy them end up ordering a second set for a vehicle they no longer own.
Will the inserts stay in during hard driving?
They can lift out on washboard roads if the recess is not perfectly clean, which is the most common complaint. Wipe each cubby dry before seating the insert and the friction holds for the life of the car.
It also helps to press each piece flat with a fingertip around the edges so no corner is riding up, since a lifted corner is what lets vibration work it free.
What if my trim has fewer or more recesses than the pack covers?
Fewer is fine, because extra pieces simply sit in your parts bin. Some variants measure slightly smaller than the actual cubbies on certain trims, so check the fit against one recess before expecting all fourteen to seat.
Fitment covers the 2018-2023 Crosstrek and the 2018-2023 Impreza in both hatchback and sedan bodies.
9. Hugeek Rear Bumper Protector for 2024-2027 – Where Every Load-Out Scratch Happens
Hugeek Rear Bumper Protector Compatible with Subaru Crosstrek 2024-2026 2027 Car Accessories ABS Plastic Material Matte Black Non-Slip Scratch-Resistant Trunk Door Protector
Fits 2024-2027 Crosstrek
ABS plastic matte black
Non-slip scratch texture
Adhesive install
Pros
- Precisely contoured to the 2024-2026 Crosstrek trunk door sill
- Matte black finish blends with factory trim
- Stiff non-slip surface stands up to load and unload wear
- Adhesive backing makes installation quick
Cons
- Adhesive-only mount may be hard to reposition once stuck
The rear sill is where a cargo area gets damaged. Every grocery run, every firewood trip, every kayak loading session puts a bumper bag, a toolbox, or a boot heel directly on painted bodywork. This protector covers exactly that strip.
It is contoured precisely to the 2024-onward trunk door sill, and the matte black finish lines up with factory trim so it reads as a factory piece rather than an add-on.
The material is ABS plastic with corrosion resistance and enough toughness to take load-in wear rather than deforming on the first heavy landing. The textured surface is non-slip, so a grocery trolley or duffel does not slide off while you are loading.
Installation is wipe, peel, position, press. No drilling, no clips to snap, and no trim removal, which makes it one of the fastest installs in the roundup.
Will it hide damage that already exists?
It will mask existing scuffs and stains, which owners consistently say is the main reason to buy it after the fact. It is a cosmetic cover over the sill, not a body repair, so deep paint gouges are still there underneath.
It is also listed for 2024 through 2027, so it covers the current generation and the following model year in one part.
What happens if I position it wrong?
Adhesive-only mounting means a misaligned placement is annoying to fix. Peel-test the position with a sticky note or masking tape outline first, and only commit once the contour lines match the sill edges.
Give the adhesive a firm press along the full length, then avoid heavy loading for a few hours so it beds in properly.
10. NARATI LED Trunk Cargo Light – A Five-Minute Swap That Fixes a Dim Trunk
NARATI LED trunk cargo light Compatible With Subaru Crosstrek Accessories
Fits 2024-2026 trunk lamp
Plug-and-play LED
10000 hour rated
Tool included
Pros
- Much brighter pure white light than the factory yellow bulb
- Plug-and-play swap with the same bulb dimensions
- Low draw and cool-running circuit board
- Installation tool included
Cons
- A single-bulb pack means you only replace the trunk lamp
The factory trunk lamp is dim and yellow, which makes finding a bag at the back of the cargo area at night genuinely annoying. This LED swaps into the same socket with no wiring changes, and the difference is immediate on the first open.
It is listed as universal fit but the item highlight names the 2024, 2025, and 2026 Crosstrek and Impreza, which is the generation you should verify against your car before ordering.
The bulb is the same physical size as the original halogen part, which is why the install is a true plug-and-play. Inside there is a constant-current IC with a dedicated chipset and a thickened circuit board for heat dissipation, rated for a 10000 hour operating life.
A trim tool for bulb removal comes in the box, which sounds unnecessary until you try to pull a factory bulb out of a tight trim recess with your fingers.
Will it fit a 2018-2023 Crosstrek trunk lamp?
Do not assume so. The named application is the 2024-2026 Crosstrek and Impreza, and the second-generation trunk lamp is a different part. Treat the listed years as the real spec rather than the universal-fit label.
Since the bulb is the same size as the original halogen, it may physically slot in, but the connector and trim depth can differ enough that a seated fit is not guaranteed.
Does a brighter bulb drain the car or cause any warning?
It draws less power than the halogen bulb it replaces, and the low-draw design is one reason the board is described as cool-running. It does not interfere with vehicle electronics, and reported problems across reviews are close to nonexistent.
Because the pack is a single bulb, plan to check whether other interior lamps are the same base if you want a matching look throughout.
11. HOHUIGO Windshield Sun Shade for 2018-2026 – The One Accessory That Spans Both Generations
Windshield Sun Shade Sun Visor Accessories for Subaru Crosstrek 2018-2026
Fits 2018-2026 Crosstrek
201T polyester, 98 percent UV block
Pop-up folding frame
54 by 33 inches
Pros
- Custom-cut outline fits the Crosstrek windshield closely
- Cuts cabin heat noticeably on hot days
- Pop-up design is faster than a folding accordion shade
- Elastic band plus visor position holds it in place
- Storage bag included
Cons
- Folding it back up can be fiddly on a large windshield
- Retention strap has snapped for some owners after extended use
- May need slight adjustment around a dash camera mount
Of everything in this roundup, the sun shade has the widest fitment range: one part covers the 2018-2026 Crosstrek, spanning both body generations. If you are unsure which accessories suit your year, this is the easiest place to start.
It is a custom-cut outline rather than a generic rectangle, so it follows the windshield curve instead of leaving a gap at the edges. The pop-up frame also sets up and folds away faster than an accordion shade, which matters when you are doing it every morning in summer.
The construction is 201T polyester with 98 percent UV blocking, measured at 54 by 33 inches. Owners confirm good coverage and meaningful heat reduction, with a claimed interior temperature reduction of up to 40 degrees Fahrenheit on a hot parked car.
It stays in place through the elastic retention band combined with the visor position, and it includes a compact storage pouch so it does not end up loose on the parcel shelf.
Does it get in the way of a dash camera or sensor mount?
It can need slight adjustment around a dash camera mount, and owners with a low-profile camera near the mirror report working the shade around it. The elastic band stretches enough to accommodate most mounts without removing them.
Install the camera first, then work out where the shade seats. The reverse order usually means reseating the shade every morning.
How does it compare with the factory sunshade?
Owners of the OEM version on subaruxvforum tend to praise it for insulating as well as reflecting, not just blocking light. If you already have a factory unit that fits well, that is a hard accessory to improve on.
Fold the aftermarket shade carefully, since the recurring complaint is a fiddly fold, and the retention strap is the component most likely to need replacing after extended use.
12. Spigen Rugged Armor Key Fob Cover – The Lowest-Effort Protection in the Roundup
Spigen Rugged Armor Subaru Key Fob Cover with Carabiner
Fits Subaru key fobs
TPU with carbon fiber texture
Snap-on fit
Zinc alloy carabiner
Pros
- Snug exact fit on the Subaru fob with full button access
- Absorbs drop impact and guards the fob shell from scratches
- Matte non-tacky texture that still grips well in the hand
- Carabiner clips to a belt loop or bag conveniently
Cons
- Adds some bulk to an already chunky fob
- Matte finish can pick up pocket lint
- Carabiner is aluminum rather than steel so the opener may scuff
Subaru key fobs are heavy, glossy, and live in a pocket next to keys, and the paint wears off in months. A TPU shell takes the scuffing instead and gives you a carabiner to clip the fob to a bag so it does not end up in a snow drift at the trailhead.
It is a snap-on fit with no tools, and the button cutouts keep every fob function accessible, including the mechanical key release.
The build is flexible, shock-absorbent TPU with carbon-fiber-look accents and a matte, non-tacky texture. Matte matters here: a glossy fob is a fob that picks up fingerprints and turns slippery, which is a real problem when you are opening a door wearing gloves.
The included hardware is a zinc alloy carabiner and an O-ring, so you can clip it to a belt loop, a backpack strap, or a lanyard.
Will it fit my fob if I have an aftermarket or older Subaru?
It is made for Subaru fobs across models including the Outback, Crosstrek, and Forester, and the fit is described as snug with full button access. If your fob shape is significantly different, check the fitment listing before buying.
The snugness is the point, but it does mean it is a molded fit rather than a universal sleeve, so a different fob generation will not stretch to accommodate it.
Is the added bulk a problem?
It does add some bulk to an already chunky fob, which is the most common trade-off. The carabiner compensates by giving you a way to keep the fob somewhere other than a coat pocket, where it is more likely to be dropped.
The carabiner is aluminum rather than steel, so avoid levering bottles with the opener if you care about the finish.
13. WBLATP Wireless Charging Pad for 2024-2026 – Stops the Phone Sliding in the Cupholder
Wireless Charging Pad for 2024-2026 Subaru Crosstrek Accessories
Fits 2024-2026 console pad
Silicone with heat dissipation
Dual-sided non-slip grip
Pros
- Precision fit that stops the phone sliding while driving
- Leaves the charger power switch accessible
- Does not slow or interrupt wireless charging
- Waterproof silicone wipes clean easily
- Doubles as extra storage when the charger is off
Cons
- It is a protective pad only and adds no charging capability
- Very thick phone cases can slow charging
- Some variants are cut slightly small for the console recess
Let us be clear about what this is. It does not add charging capability. It is a precision silicone pad that sits on the factory wireless charging surface in the console and gives your phone something to grip, so it stops sliding across the console on every turn.
If your phone is already charging in there, the difference is that it stays centered. If your phone is not charging, the pad simply becomes a small tray.
The material is silicone chosen for heat dissipation and scratch resistance, which matters because wireless charging generates heat and the factory pad is easy to scuff with a phone case. A dual-sided non-slip grip means no adhesive is needed, and nothing is left behind when you pull it out.
It is waterproof and wipes clean, and the cutout preserves access to the charger on and off control, which is the detail that separates a good pad from one you stop using after a week.
Does the pad slow down wireless charging?
No, owners confirm charging speed and connection are unaffected. The one caveat is a very thick phone case, which can reduce charging performance independently of the pad.
Because the silicone is thermal, it actually helps move heat away from the coil rather than trapping it against the console.
Will it fit my console recess exactly?
The pad is cut 1:1 to the 2024-2026 console charging pad, and most buyers report a clean fit. A minority found variants cut slightly small for their console recess, so check the dimensions against the recess before committing.
It is listed for the Base, Premium, Sport, Limited, and Wilderness trims, and it does not interfere with the armrest lid.
14. PIMCAR Fuse Box Coin Container – Hidden Storage in Dead Space
PIMCAR Fuse Box Coin Container Inner Storage Tray for Subaru Impreza XV Crosstrek Forester Legacy Outback WRX STI Ascent Accessores (with Non-Slip Red Liner)
Fits 2013-2026 Crosstrek
ABS with red rubber liner
Tool-free install
5 by 3.5 by 3 inches
Pros
- Gives the usually empty fuse box a usable purpose for coins and cards
- Snaps straight into the factory opening in about a minute
- Rubber liner stops coins rattling against the engine bay
- Fits a wide range of Subaru model years
- Fuse panel stickers help identify circuits
Cons
- Tray can feel loose or need reseating after the fuse panel is opened
- Fits are model-year specific within the Subaru range
- A few buyers report the panel is not perfectly flush
The lower dash fuse box cover is an empty plastic panel that costs nothing to replace and hides perfectly well. Swapping it for a coin container gives you a dry, out-of-sight compartment for toll change, parking cards, and a spare key, right where you are already standing at the gas pump.
Install is about a minute. Pull the factory panel, drop this in, put the fuse cover back on top. That is the entire procedure, and nothing is drilled or clipped.
The body is ABS plastic with a textured non-slip red rubber liner. The liner does more than add color: it dampens coin rattle in the engine bay, which you would otherwise hear over every speed bump, and it stops loose change from scratching nearby surfaces.
At 5 by 3.5 by 3 inches there is usable volume, and the included fuse panel stickers help you identify circuits if you ever need to pull a fuse. Fitment is broad across Subaru models, covering the Crosstrek from 2013 through 2026 along with many other lines in the range.
Does it fit every Subaru model year?
No. The listing spans many models and years, including the 2013-2026 Crosstrek, but fit is still model-year specific within the Subaru range. A few buyers report the panel sitting slightly proud rather than perfectly flush.
Check the fitment list for your exact year before ordering, and compare the panel shape against the existing cover if you are outside the listed range.
Does the tray stay put when I open the fuse panel?
The tray can feel loose and need reseating after you have worked under the dash, because repeated access to the fuse box disturbs it. Reseat it and press the edges flat before closing the panel.
It is a low-cost, low-risk swap, and having a labelled fuse map back in the factory location is arguably the more useful part of the whole change.
15. AZZIGO 11.6-Inch Touchscreen Protector – Screen Protection for the STARLINK Display
AZZIGO Screen Protector For 2024 2025 2026 Subaru Crosstrek (Premium/Sport/Limited/Wilderness) 11.6-inch Multimedia Touchscreen 9H PET Ultra Tough High Clear
Made for 2024-2026 11.6-inch screen
9H hardness PET film
Anti-fingerprint coating
Pros
- Cuts cleanly to the 11.6-inch Starlink touchscreen
- Good clarity that is hard to notice on the display
- Easiest protector to install and de-bubble among those tried
- Repositionable without losing adhesion
- Includes wipes
- bubble remover and cloth
Cons
- Edges can lift and trap air that will not clear
- A hot day can bubble the film across the whole screen
- Larger than a phone protector
- so alignment takes patience
The 11.6-inch center display is the most touched surface in the car, and a single scratch across it is permanent. A 9H hardness PET film costs less than most people expect and is the cheapest way to keep that screen looking new for the life of the car.
Clarity is the surprise. Owners consistently say the film is hard to notice on the display, which matters because a cloudy screen protector is worse than no screen protector when you are trying to read a map.
The film uses a plasma coating that reduces fingerprints and makes smudges easier to wipe away, and the high-transmittance material preserves display clarity. The included cleaning kit includes wipes, a bubble remover, and a cloth.
Fit is cut specifically for the 2024-2026 Crosstrek 11.6-inch Starlink touchscreen across the Premium, Sport, Limited, and Wilderness trims. A 90-day warranty covers the install period.
Will it bubble on a hot day?
That is the main weakness. Several owners report heat-induced bubbling across the screen and edges lifting to trap air that will not clear, and the adhesive is the weak point of the product overall.
Install it in the shade on a cool day, and treat a hot parked car as the one condition to avoid. If it does bubble, replacing it is the practical answer rather than trying to massage the film back down.
Will it fit a 2018-2023 Crosstrek screen?
No. The 2024-onward Crosstrek has an 11.6-inch display and earlier models have a different screen size and shape, so this cut will not match a second-generation center stack.
For a 2018-2023 car, search for a protector listed against that model year and screen size rather than assuming the dimension transfers.
How to Choose Subaru Crosstrek Accessories Without Wasting Money
The recurring theme across owner forums is simple: buy protection and storage before you buy appearance. Every Crosstrek wears the same way in daily use, and the accessories that solve wear are the ones people keep while the decorative ones end up in a box. Here is the decision framework we use.
Check your model year and trim before anything else. The second generation ran 2018-2023 and the third generation began with 2024. The cargo floor shape, the console box, the roof clamp geometry, the touchscreen size, and the climate control layout all changed between them. A seller listing a year range has often simply copy-pasted a range, so read the fine print inside the product description rather than the title.
Match the accessory to the way you actually use the car. If you haul a dog every day, the backrest mat and armrest cover outrank a roof box. If you ski or camp monthly, crossbars and a cargo tray move up. If you commute in a four-season city, the liners, the console tray, and the door inserts are where the money goes.
Understand install difficulty honestly. On this list, drop-in items such as the door inserts, the fuse box tray, the console organizer, and the key fob cover take a few minutes and need no tools. Adhesive items such as the bumper protector and the touchscreen film take longer because positioning matters more than speed. The only item needing real tools and care is the crossbars, where a dry-fit before tightening saves you from a strip of paint.
Protect your warranty with the right order of operations. A bolt-on floor liner, a cargo mat, a sunshade, or a key fob cover carries no meaningful warranty risk. Anything that requires cutting, drilling, or removing structural factory parts is a different conversation, and a factory accessory installed through a dealer with its own warranty is the safest route if you want that coverage. Read the modification terms in your owner’s manual before starting on anything that touches wiring, the roof, or the exhaust.
Watch the sensor zones on driver-assist vehicles. On models with EyeSight hardware, keep mounts, light bars, roof cargo, and large bumper-mounted accessories clear of the forward camera and the grille-mounted sensor area. Anything that blocks or dirties those zones can trigger a warning or disable a feature, and no accessory is worth losing a safety system over.
Build a plan by spend level rather than by shopping cart. Owners who regret purchases usually over-invest early in one category and leave the cabin unprotected. A sensible sequence is: floor and cargo protection first, then storage, then carrying capacity, then tech, then style. Each of the items in this roundup sits in one of those five slots, so you can buy the cheapest item in each slot and still have a well-equipped car.
Two things we would skip. Skip a product whose fitment line does not name your model year, regardless of how good the photographs look. And skip expensive styling pieces for a car you plan to sell, because bolt-on accessories rarely recover their cost at resale while floor liners and a cargo tray visibly help the next owner.
Frequently Asked Questions
What are the must-have accessories for a Subaru Crosstrek?
The must-haves are protection and storage first: custom-fit all-weather floor liners, a cargo trunk mat with backrest protectors, a console organizer for the deep armrest box, and crossbars if you carry gear on the roof. Add a bumper protector for the cargo sill and a sunshade for summer. Most are drop-in or adhesive and take under an hour.
Are 2018-2023 Subaru Crosstrek accessories compatible with 2024 models?
Usually not. The second generation ran 2018-2023 and the third generation began in 2024, and the cargo floor, console box, roof clamp locations, climate control layout, and screen size all changed. Crossbars, console organizers, cargo covers, and screen protectors sold for the earlier years generally will not fit the later car. Always check the fitment line inside the product description.
Do Crosstrek accessories void the warranty?
A bolt-on floor liner, cargo mat, sunshade, key fob cover, or console tray does not meaningfully affect your warranty. Anything requiring cutting, drilling, or removal of factory structural parts is a different question, and modifications that affect safety systems can create problems. Check the modification terms in your owner’s manual, and use a dealer install for factory accessories if you want a workmanship warranty.
How do you make a Subaru Crosstrek look better without changing anything?
The cheapest visual upgrades are non-permanent and non-invasive: aluminum climate control knob rings, a color-matched set of anti-dust inserts for the door pockets and cupholders, and a padded armrest cover that also hides existing wear. All three install without tools, adhesive on some pieces, and can be removed when you sell the car.
What are the best roof gear options for a Crosstrek?
The only crossbar set in this roundup is a locking aluminum U-bolt design for 2018-2023 cars with raised side rails, rated at 300 pounds for the bars themselves. Work from your vehicle roof rating rather than the bar rating, since the car is normally the lower limit. Third-generation cars need crossbars listed for that generation and clamp style.
The Bottom Line on the Best Subaru Crosstrek Accessories
If you own a 2024-2026 Crosstrek, start with the LASFIT floor liners and the powoq cargo and backrest mat set, then add the Coleya console organizer and the Hugeek bumper protector. That combination protects the cabin, the cargo area, and the sill, and every piece installs in minutes.
If you own a 2018-2023 Crosstrek, the same order works with the Powerty cargo cover, the INTGET armrest cover, and the FengYu crossbars for gear-carrying. Check the accessory fits your generation before anything else, and buy protection before style. That is the fastest route to a Crosstrek that still looks good in 2026 after a full winter of salt and gravel.