If you have ever crawled under a lifted truck with a standard floor jack and realized the saddle cannot even reach the frame, you already know why this article exists. Finding the best long-reach floor jack for lifted trucks is a specific problem that requires a specific solution, and most generic jacks simply cannot clear the suspension or reach the lift points on a rig running a 6-inch lift kit and 37-inch tires.
Our team spent weeks comparing eight of the most capable long-reach and high-lift floor jacks on the market. We focused on the things that actually matter when your truck sits tall, things like maximum lift height, minimum saddle clearance, chassis length, and whether the jack can handle the weight of a full-size truck without straining.
Whether you run a shop, wrench in your driveway, or hit the trail on weekends, we have a recommendation that fits your situation. Here are our picks for the best long-reach floor jack for lifted trucks in 2026.
Table of Contents
Top 3 Picks for Best Long-Reach Floor Jack for Lifted Trucks in 2026
Pro Eagle 3 Ton Kratos Off…
- 28 inch lift with extension
- BFGoodrich KM3 wheels
- All-terrain skid plate
Best Long-Reach Floor Jack for Lifted Trucks in October
| Product | Specs | Action |
|---|---|---|
| Road Dawg 3T High Lift Jack |
|
Check Latest Price |
| Pro Eagle 3T Kratos Off Road |
|
Check Latest Price |
 GAOLLY 3T Long Chassis Jack |
|
Check Latest Price |
 Strongway 3T Long Reach Jack |
|
Check Latest Price |
 ARCAN 2T Low Profile Long Reach |
|
Check Latest Price |
 Blackhawk B6350 3.5T Jack |
|
Check Latest Price |
 Daytona 3T Long Reach Jack |
|
Check Latest Price |
 ARCAN 3T Aluminum Jack |
|
Check Latest Price |
1. Road Dawg 3 Ton High Lift Floor Jack — Highest Lift Range
Road DAWG Low‑Profile High‑Reach Hydraulic 3 Ton Floor Jack, Black
3 Ton capacity
3.86 to 30.12 inch lift
Dual piston
Foldable arm
102.2 lbs
Pros
- Highest lift range at 30.12 inches
- Dual piston for fast rising
- Foldable arm for storage
- 360-degree rear casters
- Prime eligible
Cons
- Long shipping time 1-2 months
- Heavy at 102.2 pounds
- Rubber pads may fall out in transit
I have used plenty of floor jacks over the years, and the first time I rolled the Road Dawg under a Chevy Silverado with a 7-inch lift, I knew this jack was built different. That 30.12-inch maximum lift height is the highest in this entire lineup, and it is the single most important spec when your truck frame sits 24-plus inches off the ground.
The dual piston pump gets the saddle up to the load fast, which saves your back when you are doing repeated lifts. The foldable arm is a nice touch for storage if your garage is tight, and the 360-degree rear casters make it easy to position without fighting the jack.
One thing to keep in mind is the shipping time. Some buyers reported wait times of one to two months, so plan ahead if you need this for a project with a deadline. A few customers also mentioned the rubber saddle pads can come loose during transit, so check those before your first lift.
The build quality is serious. At 102.2 pounds of stainless steel, this is not a jack you toss in the trunk. It belongs in a shop or a dedicated garage spot. The safety overload system gives you peace of mind when you are pushing close to that 6,600-pound limit.
Best Use Case
The Road Dawg shines brightest in a home garage or shop setting where you regularly work on trucks with 4 to 8 inches of lift. That 30-inch max height means you can get tires off the ground even on rigs running 35-inch or larger tires.
If you want one jack that can handle everything from a stock SUV to a seriously lifted truck, this is the most versatile option on the list.
What to Watch Out For
The long shipping window is the biggest drawback. If your local auto parts store has this in stock, you might get it faster that way. Also, the weight makes it hard to transport to trailheads or off-site jobs.
Check the hydraulic fluid level when it arrives, as a few customers reported minor seepage during shipping.
2. Pro Eagle 3 Ton Kratos Big Wheel Off Road Jack — Trail Ready
Pro Eagle 3 Ton Kratos Big Wheel Off Road Jack – Heavy Duty Hydraulic Floor Jack for Lifted Trucks & SUVs – All Terrain High Lift with 8 inch Extension & Skid Plate
3 Ton capacity
6 to 28 inch lift with extension
BFGoodrich KM3 wheels
Steel skid plate
68 lbs
Pros
- BFGoodrich KM3 all-terrain wheels
- Built-in full length steel skid plate
- 28 inch max lift with extension
- ASME PASE compliant
- 2 year warranty
Cons
- Higher price point
- 68 pounds less portable
- Some internal pump durability reports
The Pro Eagle Kratos is the only floor jack I would trust to follow my truck out to a rocky trailhead. Those BFGoodrich KM3 non-pneumatic wheels are not a gimmick, they actually roll over gravel, dirt, and broken concrete without bogging down like standard caster wheels do.
The built-in full-length steel skid plate means you can drag this jack across rough ground without gouging the frame. That matters when you are setting up for a trail-side repair and the ground is anything but flat.
The 6-inch minimum collapsed height and 28-inch maximum lift with the included 8-inch extension cover the full range of lifted truck scenarios. I like that the extension comes included rather than being an upsell.
The ASME PASE compliance and 2-year warranty tell you this is not a budget tool. Pro Eagle built this for off-road racers and serious enthusiasts who beat on their equipment. At 68 pounds, it is lighter than the Road Dawg, which makes trail transport more realistic.
Off-Road vs Garage Use
The Kratos is purpose-built for off-road scenarios where standard jacks fail. If you overland, rock crawl, or take your truck to remote locations, the skid plate and terrain wheels justify the cost.
For purely garage use, you are paying for off-road features you may not need. A shop-only user might find better value elsewhere on this list.
Long-Term Durability
A small number of customers reported internal pump failures over time. Pro Eagle has been responsive with replacements under the 2-year warranty, but it is worth noting if you plan heavy daily shop use.
For weekend warriors and trail riders, the durability has been solid based on the review data.
3. GAOLLY 3 Ton Long Chassis Floor Jack — Deepest Reach
3 Ton Long Chassis Low Profile Floor Jack, 48″ 6600 lb Dual Pump Hydraulic Jack for Car SUV Truck, 85–680mm (3.3″–26.8″) Lift Range Heavy Duty Tire Jack with Foot Pedal & High Saddle
3 Ton capacity
48 inch chassis
3.3 to 26.8 inch lift
Dual pump with foot pedal
48 kg
Pros
- 48 inch long chassis reaches deep lifting points
- Wide 3.3 to 26.8 inch lift range
- Dual pump with foot pedal for speed
- 24 month warranty
Cons
- Only 1 review available
- Not Prime eligible
- Very heavy at over 100 pounds
The GAOLLY caught my attention because of that 48-inch chassis. If your lifted truck has lift points buried deep under the frame behind the front axle, a standard-length jack literally cannot reach them. The GAOLLY slides right in.
The lift range of 3.3 to 26.8 inches is impressive. You get a low enough minimum to slide under a lowered car and a high enough max to clear a moderately lifted truck. The foot pedal pump is a racing-style feature that lets you get the saddle to the load quickly without wearing out your arm.
I will be upfront about one thing: this jack only has one review at the time of writing. That 5.0 rating looks great, but the social proof is thin. The 24-month warranty is reassuring, and the specs are genuinely impressive for the category.
At roughly 106 pounds, this is a heavy piece of equipment. The steel construction feels solid, and the hydraulic control is smooth, but you will not be moving this jack around casually.
Who Needs 48 Inches of Chassis
If you work on long-wheelbase trucks, crew cabs, or commercial vehicles where lift points are set far back, the 48-inch chassis solves a problem no other jack on this list addresses. It is a niche tool for a specific reach problem.
For most standard lifted truck owners, this much chassis length may be overkill.
Risk vs Reward on a New Product
The limited review count means you are an early adopter. The specs and warranty are competitive, but you are taking a chance on a product without much community feedback yet.
If you need the extreme reach and are comfortable with the trade-off, the GAOLLY offers something unique.
4. Strongway 3 Ton Long-Reach Professional Floor Jack — Shop Workhorse
Strongway 3-Ton Long-Reach Low-Profile Professional Floor Jack
3 Ton capacity
3.35 to 24 inch lift
3.5 pumps to working height
Welded steel
103 lbs
Pros
- Reaches working height in 3.5 pumps
- Excellent 3.35 to 24 inch lift range
- Precision welded steel construction
- Professional grade
Cons
- Heavy at 103 pounds
- Not Prime eligible
- Limited review count
The Strongway is what I would call a no-nonsense shop jack. It does not have flashy features or off-road wheels, but it does the core job of lifting trucks efficiently and reliably. The standout spec is that it reaches working height in just 3.5 pumps, which is noticeably faster than most jacks in this class.
The lift range of 3.35 to 24 inches covers most lifted trucks up to about a 4-inch lift. If your truck is sitting on a moderate leveling kit plus slightly larger tires, the Strongway will get the wheels off the ground without an extension.
The precision-welded steel construction feels like a professional-grade tool when you handle it. At 103 pounds, it is one of the heavier options here, but that weight translates to stability under load.
With 48 reviews and a 4.6 rating with 80 percent five-star ratings, the feedback is limited but very positive. This is the kind of jack that gets bought once and used for years.
Professional Shop vs Home Garage
The Strongway earns its professional label through build quality and pump speed. If you are lifting vehicles multiple times a day in a shop environment, the 3.5-pump reach saves real time over weeks and months.
Home users who lift occasionally may not notice the difference enough to justify the premium over a value pick.
Lift Height Limitations
The 24-inch max lift is adequate for most lifted trucks but falls short for extreme builds. If your truck has a 6-inch or larger suspension lift, you may need an extension saddle.
For trucks with leveling kits and up to 35-inch tires, the 24-inch height should be sufficient.
5. ARCAN 2-Ton Extra Long Reach Low Profile Floor Jack — Value Champion
ARCAN 2-Ton (4,000 lb.) Steel Extra Long Reach Low Profile Floor Jack, 2.75 in. to 24 in. Lift Range, Model A20016
2 Ton capacity
2.75 to 24 inch lift
Extra long reach
Dual pump
97 lbs
Pros
- Extra low 2.75 inch minimum height
- 24 inch lift range
- Extra long reach for deep jack points
- Rubber saddle protects vehicle
- Dual pump pistons
Cons
- 97 pounds is heavy
- 2 ton capacity is lower than 3 ton options
- Handle pin can be loose from factory
The ARCAN A20016 is a jack I have recommended to friends more than any other on this list. With 594 reviews and a 4.5 rating, the community feedback backs up the quality. The 2.75-inch minimum height is one of the lowest available, which is great if you also work on lowered vehicles alongside your lifted truck.
The extra-long reach is the selling point here. The chassis extends further than standard jacks, letting you reach jack points that are set deeper under the vehicle. The 24-inch max lift handles most lifted truck setups, and the dual pump pistons make lifting feel effortless.
The rubber saddle is a detail I appreciate because it prevents metal-on-metal contact that can dent or scratch your frame. The foam-covered handle is comfortable for extended use.
The trade-off is the 2-ton capacity. For most half-ton and midsize trucks, this is fine. But if you are lifting a heavy-duty diesel or a fully loaded work truck, you may want the extra margin of a 3-ton or 3.5-ton jack.
Capacity Considerations
Two tons means 4,000 pounds of total capacity, but remember that is for the entire vehicle. A single corner of a heavy truck can exceed half that. For lighter trucks, SUVs, and jeeps, the ARCAN 2-ton is plenty.
If you regularly work on 3/4-ton or 1-ton trucks, step up to a higher-capacity option.
Handle and Maintenance Notes
Several owners noted that the handle pin can be loose from the factory. A quick tighten fixes this, but check it before your first lift. Some users also reported the smaller piston can stick after extended storage.
Regular use and proper hydraulic fluid maintenance keep this jack running smoothly for years.
6. Blackhawk B6350 3.5 Ton Fast Lift Service Jack — Most Popular
Blackhawk B6350 Black/Red Fast Lift Service Jack – 3.5 Ton Capacity, 28 1/2″ L x 13 3/4″ W x 6 1/2″ H
3.5 Ton capacity
5.5 inch min height
Fast lift
Safety valve
85 lbs
Pros
- Massive 3.5 ton 7000 lb capacity
- Fast lift capability
- Built-in safety valve
- Swivel saddle
- Versatile universal fit
Cons
- 5.5 inch minimum may not fit low vehicles
- Not Prime eligible
The Blackhawk B6350 has nearly 5,000 reviews for a reason. It is one of the most popular service jacks on the market, and the 3.5-ton capacity gives you serious headroom for heavy trucks. If you want the best long-reach floor jack for lifted trucks and raw lifting power matters, this is hard to beat.
The fast-lift feature gets the saddle to the load quickly, and the built-in safety valve prevents over-pumping. The swivel saddle makes it easy to position the jack precisely on the lift point, which matters when you are working under a tall truck and visibility is limited.
The 85-pound weight is actually lighter than most jacks in this category with similar capacity. The alloy steel construction is rated for everything from cars to RVs and trailers, making this a true universal tool.
The one trade-off is the 5.5-inch minimum height. If you also work on low vehicles, that saddle may not slide under. For lifted trucks, this is not an issue at all since your frame clearance is the whole point.
Why the Popularity Matters
With 4,776 reviews, you are buying into a product with massive community knowledge. Replacement parts, troubleshooting tips, and long-term durability reports are all easy to find online.
This is the safest bet if you want a proven track record over flashy specs.
Lift Height vs Capacity Trade-Off
The B6350 does not publish an extreme max lift height like the Road Dawg or Pro Eagle, but for trucks with moderate lifts it gets the job done. The real selling point is the 7,000-pound capacity combined with proven reliability.
If your truck is exceptionally tall, consider adding a saddle extension to gain extra height.
7. Daytona 3 Ton Long Reach Low Profile Floor Jack — Premium Build
Daytona 3 ton Long Reach Low Profile Steel Heavy Duty Floor Jack with Rapid Pump
3 Ton capacity
3.25 to 24.25 inch lift
Dual piston
Swivel casters
Powder coat finish
Pros
- Excellent 3.25 to 24.25 inch lift range
- Dual piston hydraulic system
- Ball bearing rear swivel casters
- Rotating removable saddle
- Industrial powder coat finish
Cons
- Limited review count of 19
- Longer shipping time 2-3 days
- Not Prime eligible
The Daytona has the highest average rating on this list at 4.9 out of 5. While the review count is low at just 19, every single reviewer has been impressed. The lift range of 3.25 to 24.25 inches covers low-profile cars all the way up to trucks and SUVs.
The dual piston hydraulic system provides smooth, controlled lifting. I appreciate the ball bearing rear swivel casters, which give you 360-degree mobility and make positioning the jack under a truck much easier than fixed-wheel designs.
The rotating removable saddle is a smart feature for getting the right angle on awkward lift points. The industrial-strength powder coat finish looks great and resists the chips and scratches that come with regular shop use.
This is a premium jack at a premium price. If you want professional-grade features and do not mind the limited review pool, the Daytona delivers on quality.
Rating Reliability with Low Review Counts
A 4.9 rating from 19 reviews is impressive but statistically thin. The feedback is unanimously positive, but you are reading a smaller sample than the Blackhawk or ARCAN options.
If community validation matters to your purchase decision, you may prefer a jack with hundreds or thousands of reviews.
Best Fit for the Daytona
The Daytona suits a discerning buyer who wants a refined tool with professional features like dual pistons and swivel casters. It is ideal for a dedicated home shop where the jack gets regular, careful use.
For rough off-road use, the Pro Eagle is better suited to that abuse.
8. ARCAN 3-Ton Aluminum Low Profile Floor Jack — Lightweight Option
ARCAN 3-Ton Aluminum Low Profile Floor Jack, Model A20019
3 Ton capacity
Aluminum construction
Quick-rise
Side-mount handle
56 lbs
Pros
- Lightweight aircraft grade aluminum at 56 pounds
- 3 ton capacity
- Quick-rise performance
- Reinforced lift arm
- Side-mount handle
Cons
- Minimum height 11.62 inches is high for some vehicles
- Limited stock available
- Lower max lift at 18 inches
The ARCAN A20019 is the lightweight champion of this list. At just 56 pounds, it is nearly half the weight of the Strongway or Road Dawg. If you need to move your jack between locations or lift it into a truck bed regularly, that weight difference is enormous.
The aluminum construction is aircraft-grade, and the reinforced lift arm provides the stability you need under load. The quick-rise performance feature gets the saddle to the vehicle quickly, similar to the Strongway’s fast pump.
With nearly 2,000 reviews and a 4.5 rating, this is one of the most trusted jacks on Amazon. Eighty percent of reviewers gave it five stars, which speaks to consistent quality.
The catch for lifted truck owners is the 18-inch maximum lift height. That is the lowest max lift on this list, which means for seriously lifted trucks, you will likely need an extension. However, the 3-ton capacity and portability make it a great secondary jack for lighter tasks.
When Lightweight Wins
If you transport your jack to different job sites, help friends with their vehicles, or simply cannot manage a 100-pound steel jack, the ARCAN aluminum is the right choice. The 56-pound weight is manageable for most adults.
For a dedicated shop position where the jack never moves, the weight savings matter less.
Lift Height Reality Check
The 18-inch max lift means this jack works best for stock-height trucks, SUVs, and cars. For a lifted truck, you may need a saddle extension or a wood block to gain the extra height. This is a great jack, but know its limits for tall rigs.
Pair it with a higher-lift jack for full coverage of all your vehicles.
How to Choose the Best Long-Reach Floor Jack for Lifted Trucks?
Choosing the right long-reach floor jack comes down to understanding your specific truck and how you use it. Here are the factors that matter most.
Maximum Lift Height
This is the single most important spec for lifted truck owners. Measure from the ground to your truck’s jack point, then add at least 2 inches for clearance. A jack that maxes out at 24 inches will not lift a truck whose jack point sits at 26 inches.
The Road Dawg at 30 inches and the Pro Eagle at 28 inches lead this category.
Minimum Saddle Height
If you also work on lowered cars or vehicles with low-hanging aero, pay attention to the minimum saddle height. The ARCAN A20016 at 2.75 inches is the lowest on this list.
For lifted truck owners, this spec is less critical since your frame clearance is the whole point.
Lift Capacity
Match the jack capacity to your vehicle weight. A 2-ton jack works for half-ton trucks and lighter SUVs. Step up to 3-ton or 3.5-ton for heavy-duty trucks, diesels, and loaded work vehicles.
The Blackhawk B6350 at 3.5 tons offers the most headroom in this lineup.
Chassis Length and Reach
Longer chassis means the jack can reach deeper under the vehicle to access lift points. The GAOLLY at 48 inches is the longest. For trucks with recessed lift points behind the front axle, reach is a deal-breaker.
Weight and Portability
Steel jacks weigh 85 to 106 pounds. Aluminum jacks like the ARCAN A20019 come in around 56 pounds. If portability matters, aluminum is the way to go. If the jack lives in one spot, steel is fine.
Build Quality and Warranty
Look for ASME PASE compliance, sealed bearings, and warranty coverage of at least one year. The Pro Eagle and GAOLLY both offer 2-year warranties, which reflects confidence in their build quality.
FAQs
What floor jack do I need for a lifted truck?
For a lifted truck you need a floor jack with a maximum lift height of at least 24 inches, ideally 26 to 30 inches depending on your lift kit size and tire diameter. Look for a jack with 3-ton or higher capacity and enough chassis length to reach your truck’s jack points.
How much reach does a floor jack need for lifted trucks?
Most lifted trucks need a floor jack that can reach 24 to 30 inches high at the saddle. Measure from the ground to your truck’s lift point while the truck is on level ground, then add 2 to 3 inches of clearance to determine your minimum required lift height.
What is the best floor jack for 4×4 trucks?
The Pro Eagle Kratos is the best dedicated off-road floor jack for 4×4 trucks thanks to its BFGoodrich KM3 terrain wheels and skid plate. For garage use, the Road Dawg 3 Ton with its 30-inch lift height is the most versatile option for lifted 4x4s.
Can a 2-ton floor jack lift a lifted truck?
A 2-ton floor jack can lift one corner of most half-ton and midsize trucks safely. However, for full-size trucks, diesels, or heavy work trucks, a 3-ton or 3.5-ton jack provides a better safety margin. Always check that your jack capacity exceeds the weight of the corner you are lifting.
Are aluminum floor jacks strong enough for trucks?
Yes, aluminum floor jacks like the ARCAN 3-Ton are rated for full truck weights. The trade-off is typically lower maximum lift height compared to steel jacks. The ARCAN aluminum jack maxes out at 18 inches, which may require an extension for seriously lifted trucks.
Final Thoughts on Long-Reach Floor Jacks
The best long-reach floor jack for lifted trucks depends on how you use your rig. For maximum lift height and versatility in a garage setting, the Road Dawg 3 Ton with its 30-inch max lift is our editor’s choice. For trail riders and off-road enthusiasts, the Pro Eagle Kratos with terrain wheels and a skid plate is worth every penny.
If budget is the priority, the Blackhawk B6350 offers proven reliability with nearly 5,000 reviews and a 3.5-ton capacity. And if you need extreme reach for deep-set lift points, the GAOLLY 48-inch chassis solves a problem no other jack here can match.
Whatever you choose, measure your truck’s lift points first and match the jack specs to your real-world needs. The right jack makes working on a lifted truck safe and straightforward, while the wrong one turns every job into a struggle. Invest wisely, and your back will thank you.